Video – Introducing MIP Gen 2 Tools
Over at MIP they’re elevating the bar with their new Gen 2 Series Tools. The new Gen 2 sequence comes with lazer etched sizing to make it straightforward to seek out the right measurement whereas wrenching. Also new on the nut drivers is a troublesome, black oxide coating on the tricks to improve sturdiness. With new simplified identification, and bigger shanks on the turnbuckle wrenches, the Gen 2 sequence instruments are certain to be one of the best in the marketplace.
#9850 – 5.0mm Turnbuckle Wrench Gen 2 – $15
#9855 – 5.5mm Turnbuckle Wrench Gen 2 – $15
#9803S – Nut Driver Speed Tip Wrench, 5.5mm – $15
#9804S – Nut Driver Speed Tip Wrench, 7.0mm – $15
#9200 – .050 Hex Driver Wrench, Gen 2 – $18
#9200S – .050 Speed Tip Hex Driver Wrench, Gen 2 – $15
#9201 – 1/16 Hex Driver Wrench Gen 2 – $18
#9201S – 1/16 Speed Tip Hex Driver Wrench Gen 2 – $15
#9202 – 5/64 Hex Driver Wrench Gen 2 – $18
#9202S – 5/64 Speed Tip Hex Driver Wrench Gen 2 – $15
#9203 – 3/32 Hex Driver Wrench Gen 2 – $18
#9203S – 3/32 Speed Tip Hex Driver Wrench Gen 2 – $15
#9204 – 3/32 Ball Hex Driver Wrench Gen 2 – $19
#9204S – 3/32 Ball Speed Tip Hex Driver Wrench Gen 2 – $15
#9207 – 1.5mm Hex Driver Wrench Gen 2 – $18
#9207S – 1.5mm Speed Tip Hex Driver Wrench Gen 2 – $15
#9208 – 2.0mm Hex Driver Wrench Gen 2 – $18
#9208S – 2.0mm Speed Tip Hex Driver Wrench Gen 2 – $15
#9209 – 2.5mm Hex Driver Wrench Gen 2 – $18
#9209S – 2.5mm Speed Tip Hex Driver Wrench Gen 2 – $15
#9210 – 2.5mm Ball Hex Driver Wrench Gen 2 – $18
#9210S – 2.5mm Ball Speed Tip Hex Driver Wrench Gen 2 – $16
#9211 – 3.0mm Hex Driver Wrench Gen 2 – $18
#9211S – 3.0mm Speed Tip Hex Driver Wrench Gen 2 – $15
#9212 – 0.9mm Hex Driver Wrench Gen 2 – $18
#9213 – 1.3mm Hex Driver Wrench Gen 2 – $18
#9213S – 1.3mm Speed Tip Hex Driver Wrench Gen 2 – $15
#9240 – 2.0mm Ball Hex Driver Wrench Gen 2 – $19
#9240S – 2.0mm Ball Speed Tip Hex Driver Wrench Gen 2 – $16
#9243 – 3.0mm Ball Hex Driver Wrench Gen 2 – $19
#9243S – 3.0mm Ball Speed Tip Hex Driver Wrench Gen 2 – $16
#9801 – 4.0mm Nut Driver Wrench, Gen 2 – $21
#9802 – 5.0mm Nut Driver Wrench, Gen 2 – $21
#9803 – 5.5mm Nut Driver Wrench, Gen 2 – $21
#9804 – 7.0mm Nut Driver Wrench, Gen 2 – $21
#9805 – 8.0mm Nut Driver Wrench, Gen 2 – $21
#9806 – 3/16″ Nut Driver Wrench, Gen 2 – $21
#9807 – 1/4″ Nut Driver Wrench, Gen 2 – $21
#9809 – 11/32″ Nut Driver Wrench, Gen 2 – $22
#9815 – 4.00mm Turnbuckle Wrench Gen 2 – $15
#9820 – 3.70mm Turnbuckle Wrench Gen 2 – $15
#9825 – 3.25mm Turnbuckle Wrench Gen 2 – $15
Use this hyperlink to get full particulars on the MIP Gen 2 Tools, or Click This Link to get extra MIP information on Big Squid RC.