RC4WD Trail Finder 2 "LWB" 1/10 Scale Builders Kit

From RC4WD:
The Trail Finder 2 LWB has each fashion and aggressive efficiency. You will discover a steadiness of scale particulars and efficiency constructed into each Trail Finder 2 LWB.

Performance is easy with its R3 Scale Single Speed transmission, 4WD drivetrain, Bulletproof Transfer Case, and high quality steel elements. The entrance axles have been upgraded with XVDs, offering sturdier development and a higher steering angle than inventory counterparts. The Trail Finder 2 LWB is a product of modern engineering that impresses in look and efficiency.

The Trail Finder 2 LWB is totally appropriate with an array of choices and efficiency enhancements crafted to raise the consumer expertise and improve the authenticity of a 1/10 off-road truck!

Realistic Billet Aluminum Ladder Frame Chassis
R3 Scale Single Speed Transmission
Center Mounted Realistic 4×4 Transfer Case
K44 Ultimate Scale Cast Front Axle with Upgraded XVD’s
K44 Ultimate Scale Cast Rear Axle
Super Scale 70mm White Shocks W/ Internal Springs
RC4WD Marlin Crawler Side Plastic Sliders
Soft Steel Leaf Springs

Hammer Transfer Case

Ratio: 1.47:1
Gears: Wide .8 Mod Steel Gears
Features: 8 Bearings, Cast Casing, Hardened Gears

R3 Scale Single Speed Transmission

Ratios: Pinion/Spur 14/64 = 1:4.57
Internal Ratio: 1.78:1
Gears: Wide Steel .8 Mod, Delrin Spur, Slipper Clutch

K44 Ultimate Scale Cast Axles

Ratio: 2.67:1
Hex To Hex Width: 177mm (6.96″)

Trail Finder 2 “LWB” Chassis

Features: Billet Aluminum Construction, Adjustable Shock Hoops

Drive Shafts

High Quality Plastic Material,
Very Durable High Quality Steel Yokes

TF2 “LWB” Truck Dimensions

Wheelbase: 314mm(12.4″)
Width: 193mm(7.6″)
Height: 118mm (4.65″)
Final Drive Ratios: 31.9:1

DRIVETRAIN

The R3 Single Speed Transmission comes with a troublesome forged steel case and wider gears to permit for extra abuse together with a Delrin Spur with Slipper Clutch. It additionally encompasses a sturdy billet aluminum motor mount for sturdiness.

The Trail Finder 2 LWB Kit consists of the Hammer Transfer Case. Packed with element, the case encompasses a forged steel exterior and the identical 0.8 Mod widened gears for sturdiness.

Drawing on the success of the RC4WD MOA gear units, the TF2 LWB Kit Drivetrain has essentially the most sturdy gears RC4WD has to supply so the TF2 LWB Kit can keep on the path, day after day.

The most scale-accurate axles available in the market, the RC4WD Yota II Ultimate Scale Cast Axles function modern spherical knuckles, decrease mounting factors, XVDs for the entrance axles and compact offset pumpkins.

The Drive Shafts for the TF2 LWB Kit are an all new design that includes bulletproof metal universals and a brand new top quality plastic shaft for nice driveline angles and sturdiness on the path.

SUSPENSION

The TF2 LWB Kit Chassis encompasses a molded gasoline cell that doubles as an electronics storage field and an aluminum, body mounted beneath cab electronics tray for a number of electronics tray for a number of mounting choices on your electronics.

The TF2 LWB Kit features a set of RC4WD Ultimate Scale Shocks. These shocks are designed for final scale seems to be and optimum efficiency. They’re machined from billet aluminum, are internally sprung and are utterly rebuildable!

The TF2 LWB Kit Chassis is a machined billet aluminum ladder body design with leaf springs, scale shock hoops, chassis servo mounts and laborious physique mounts and for max power.

What’s Included:

1x RC4WD Trail Finder 2 “LWB” 1/10 Scale Builders Kit

This is a equipment that requires constructing time (appro. 2-3 hours), electronics, tires and wheels.

Required to Complete:

Truck Kit

Hex Drivers (1.5mm, 2mm, 2.5mm)
Long Nose Pliers
Associated Thread Locking Adhesive
Cross Wrench or Nut Driver (4mm, 5.5mm, 7mm)

Electronics

Motor (35t 45t or 55t)
Outcry Extreme Speed Controller ESC w/ Program Card (Z-E0118)
Radio and Receiver (3 Channels or extra) (3 Channel Z-R0009, or 4 Channel Z-R0006)
Twister High Torque Metal Gear Digital Servo (Z-E0035)
Battery (Consult your “ESC” guide) Z-E0090 or Lipo battery
Charger (Consult your battery information) Chargers

Suggested Bodies