From R1 Wurks:
This is authentic Digital-3 MOD ESC you all have been ready for! Equipped with our first technology mosfet.
New from R1 Motor lab is the LCG Digital-3 2S Wireless* programmable brushless pace controller. Developed utilizing probably the most superior MICROCHIP processor and a strong proprietary software program, the LCG Digital-3 delivers probably the most technologically superior options so far. Development of the LCG Digital-3 was targeted on extremely easy energy supply wanted for modified racing in addition to supreme energy effectivity for our class main line of Stock Motors. The controller affords probably the most superior throttle and brake options to swimsuit a variety of driving kinds. The unit options an A.C.L.C. (Advanced Component Level Cooling) system. This design permits particular person encapsulated low resistance Mosfets (internal & outer elements) to switch warmth on to the higher heatsink. The system additionally comes outfitted with an all new blinky mode (zero timing) for spec racing, utilizing a complicated commutation algorithm known as COOL POWER to maintain the motor cool and ship highly effective, but extremely easy acceleration. The LCG Digital-3 boasts a redesigned case minimizing total weight and reducing the middle of gravity (LCG). We have minimized the burden from the higher case whereas enhancing warmth dissipation, achieved by enhancing air velocity exits from all sides of the ESC case. All adjustable settings are simply programmed utilizing the R1 WIRELESS ADAPTOR coupled with an iOS or Android app designed with an intuitive, straightforward to make use of interface. The new R1 Digital 3 app additionally contains a tremendous quick Live Telemetry and a inbuilt Datalogger for after race evaluation. Built in Amp draw meter for setting motor timing or for after race evaluation. Using our new over the air replace, firmware updates are actually simply downloaded via our iOS or Android apps.
Features:
- LCG full aluminum case and warmth sink design
- Full compatibility with modified and inventory racing
- Superlative FET and low-resistance energy PCB design
- 30mm fan for max cooling
- Cool Power software program/{hardware} upgrades improve pace whereas lowering motor temperature by modifying the commutation algorithm
- The Built-in 2S BEC has a Maximum voltage of 6V and seven.4V.
- New Auto Turbo / Boost timing setting and delay time setting
- New X-Lock brake response mode and PWM / brake frequency permits numerous race and management varieties
- Data port for connecting to Wireless adaptor
- Wireless adaptor permits program parameter settings and firmware upgrades
- LIVE ESC and motor telemetry (pace, temperature, present, voltage, RPM and battery consumption) could be saved in actual time with the information log
Programmable Items:
- Model Type Memory
- Select Battery Type
- Cut Off Voltage
- Power Curve
- Boost Max+TB
- Boost-TH. Limit
- Boost Min-rpm
- Boost Max-rpm
- Turbo Delay
- Turbo + Slope
- Turbo – Slope
- Acceleration
- Start Power
- Smooth Start Rate
- Smooth Start Range
- Reverse Function
- Reverse Delay
- M- Reverse Amount
- Neutral Width
- Motor Direction
- Brake Response
- FAN Control
- Drag Brake
- Min Brake Amount
- Mid Brake Amount
- Mid Brake Location
- Max Brake Amount
- Soft Brake
- Brake Freq
- Motor Freq
- Drag Freq
- Cut Off Temp
- Cut Off M-Temp
- B.E.C Voltage
- Motor Pole Num
- Gear Ratio
- Tire Diameter
- Motor-Wiring ABC or CBA
- Units
- Download
- Factory Setting
- Live and Maximum Voltage
- Live and Maximum Temp
- Max Temperature
- Motor Temp
- Motor Max Temp
- Live and Maximum amp draw (for setting timing)
- Maximum Speed
- Maximum RPM
- Error History
Specifications:
Motor Type – Sensored / 2-4 Pole Sensored
Motor Limit – >3.5T
Operating voltage – 7.4V (2S solely)
Forward / Brake / Reverse – sure
Full aluminum case / heatsink – sure
Typ. Voltage Drop @20A per part – 0.0048V
Rated Current per part – 220A
Plugged 30x30x10mm Fan – sure
BEC Output – 6V/7.4V Continuous Current of 3A
Multi-Protection-System – sure
“Boost 0” Mode – sure
Multi-frequency system – sure
Power Wires – 12Awg
Over the air Update capability – sure
Case Size(with out fan) – 32.9 x 34.6 x 21mm
Weight(with out cable) – 47g
Wireless adaptor is critical to make setting adjustments to this ESC, this system field doesn’t work for the Digital-3
ROAR,BRCA and EFRA Approved
#040007 – $251.00
Visit R1Wurks.com
See more posts about R1 Wurks
