From Pro-Line:
Transform your SCX10 I/II right into a 2WD Desert Truck with Pro-Line’s Twin I-Beam Pre-Runner Suspension Kit! In the early days of offroad desert racing, I-Beam vehicles grew to become the usual suspension setup as a consequence of their uncompromised sturdiness, simply attained long-travel, and general simplicity. Now, you possibly can seize that desert racing sprit utilizing your SCX10 I/II package as a base to construct a 1/10 scale pre-runner.
The Twin I-Beam entrance suspension consists of two lengthy “I-beam” arms that cross each other in an X-pattern. These arms management the lateral forces utilized to the wheels, whereas radius arms attain backward towards the middle skid plate to stabilize every wheel within the fore-aft path. This tremendous scale conversion package makes use of the identical geometry setup as 1:1 vehicles with true swingset steering and center-mount radius arms to optimize dealing with all through your entire suspension journey.
The I-Beam conversion package consists of every part it is advisable to simply convert your rig and utterly change the driving expertise of your SCX10. Stainless metal hyperlinks and metal pivot balls present reliable endurance, whereas the brand new battery tray strikes the battery to the rear of the car for optimum weight bias and efficiency. The new entrance shock tower options holes for twin shock mounting, and the brand new rear trailing arms have 3 wheelbase choices for added adjustability and flexibility.
Get able to hit the open desert trails with the Pro-Line I-Beam Pre-Runner Conversion!
Features:
Highly detailed, sturdy, scale-looking molded I-Beam Arms, Radium Arms and Trailing Arms
True-swing set steering utilizing chrome steel hyperlinks and pivot balls
New entrance Shock tower with twin shock mounting choices
Trailing arms with adjustable wheelbase
Rear mounted battery tray
Includes plastics and {hardware} wanted to transform the Axial® SCX10 I/II to a 2WD Twin I-Beam Pre-Runner
SCALE-LOOKING I-BEAM ARMS
Highly detailed, sturdy, scale-looking molded I-Beam arms, radium arms and trailing arms permit for easy, lengthy journey suspension
SWING SET STEERING
True-swing set steering utilizing chrome steel hyperlinks and pivot balls optimize dealing with
REDESIGNED SHOCK TOWER
New entrance shock tower permits for twin shock mounting choices
ADJUSTABLE WHEELBASE
Trailing arms with 3 adjustable wheelbase places and rear mounted battery tray for weight distribution
In The Box:
Box accommodates all components wanted to transform the SCX10 I/II to a 2WD I-Beam Suspension Pre-Runner
Need to finish:
- Axial® SCX10 I/II Kit with electronics or RTR
- Tools: 1.5mm / 2.0mm hex driver, 5.5mm nut driver, 7mm nut driver / wheel nut wrench, Needle-nose pliers, Flush cutters
Recommended Parts:
Pro-Line recommends the next components to finish your conversion. These components are usually not required, however extremely beneficial for each scale appears to be like & efficiency:
- 2015 Chevy Silverado Body (PRO360100)
- Big Bore Scaler Shocks, 3 pairs (PRO634300)
- Scale 1.9″ Tires from 4.3″ – 4.8″ tall
- Toyo Open Country R/T (PRO1021114)
- Toyo Open Country R/T Trail (PRO1022614)
- BFGoodrich KO2 (PRO1012414)
- BFGoodrich KM3 (PRO1015014)
- Dual Stage 1.9″ Foam Inserts (PRO617400)
- Spektrum Firma 85A ESC / 3300Kv Brushless Motor Combo (SPMXSEMC01)
- Spektrum 3S Lipo ( SPMX53S30H5 or SPMX53S50H3)
- Any aftermarket open rear differential will extremely improve rear traction
#PRO638500 – $89.99
Visit ProLineRacing.com
See more posts about Pro-Line
