Press Release From JConcepts:
www.jconcepts.net
JConcepts jumped out with a brand new aggressive tread sample for the 1.0” crawling and monster fanatic. The Hold was designed from the ground-up as a carved and chiseled design to deal with quite a lot of scale off-road terrain and dust bogging motion. The giant horizontal traction bars put a “Hold” on options starting from dust, asphalt, grass, mud, rock, and clay. At the tip of the tread, the downward development begins and divulges one other flat bar of gripping sample to supply offset traction controlling attributes. During the bar transitions, an angular section stabilizes and provides edginess to terrain at one other route to assist the raise and lower by much more environments.
The 63mm exterior diameter measurement offers further measurement in a profitable fleet of tires which have measurement, element, and nonetheless look girth applicable for 1/twenty fourth scale off-road crawling and monster machines. The Hold is obtainable pre-mounted to suit the FCX24 Smasher and an array of 1/twenty fourth automobiles in the marketplace. The sidewall lugging on The Hold is a factor of magnificence beginning with peaks set on the outer most constraints of the design. An alternating sample of finely detailed tread steps out and in permitting a mess of edging to face out from the design. Inscribed drops of options are positioned in an array sample to advertise extra flexibility in areas of want.
Perhaps the best element of all, the mimicked hand reducing particulars fully cowl The Hold. The horizontal traction bars are again lower and step right down to the carcass and wrap across the sidewall in a ahead progressing sample. On high of the carcass itself, extra floor removing is proven to deliver out depth. Beautiful lettering is bossed alongside the bead space inserting title, sizing, and genuine logos in plain view however rested beneath the closely modified tread.
The Hold comes commonplace within the grippy inexperienced compound and consists of mushy open cell inserts for loads of flexibility. New offset and particular clearance wheels are used on the pre-mounts that includes the Glide 5 JConcepts design, or the all-new Crusher wheel. Look for real JConcepts logos, lettering, packaging, and rubber compounding earlier than any buy. Look for respected sellers and distributors and demand genuine merchandise. The product is at all times backed by JConcepts customer support, supported, and developed by professionals with model and authenticity. JConcepts is, World Proven Innovation and Design – since 2003.
Features:
- Pre-mounted, matches – FCX24 Smasher and different 1/24thvehicles
- Robust carcass, horizonal bar based mostly, 1:1 impressed
- 63mm general measurement with out inserts
- Cut and sliced lugs, stepping and recessed lugs for contortion management
- Super Soft, Green compound
- Glide 5 and Crusher wheel choices accessible
- Staggered, drop development middle design for further edges
- Sidewall lugs to peak width, alternating standout edging
- Forward progressing mock lower sidewall lugging
- Bossed lettering, tucked away under closely modified tread
- Includes mushy, open cell insert
In soiled and muddy situations, there’s nothing higher than a contemporary set of deep tread tractor tires. One of the aliases of the mud tires, “Rice and Cane,” refers back to the objective or panorama they have been initially designed for throughout the farming and agriculture trade. The Fling Kings by JConcepts are the primary RC Mega 1.0” crawler tire accessible pre-mounted for the favored FCX24 Smasher. These tires are particularly designed to throw mud, dust, gravel, and grass identical to the actual factor.
The giant sized tires at 63mm exterior diameter, are tall sufficient to bounce by the deepest RC loam, nevertheless, it’s the tall lugs that separate them from the remaining. The 1:1 tire have been hand-cut to supply essentially the most depraved trying tires on the block. The JConcepts tires are uniquely constructed to copy a hand-cut set, nevertheless, deep tread stays to do the “mega” land injury the drivers and fanatics crave.
One of essentially the most spectacular particulars in regards to the Fling Kings is that they’re designed for the very fashionable and trade commonplace 1.0” 1/twenty fourth scale wheels and pre-mounted on both the JConcepts Glide 5 or new Crusher wheels. No particulars have been spared on these mud runners, the V-type tread is replicated to a T and the highest of the tread carries a slight recess including somewhat contact of depth to the looks. Off to the aspect, the tire lettering hits onerous with retro model JConcepts lettering, Fling King brand and crown with #4059-part quantity for straightforward identification.
The tremendous mushy “green” compound which is really helpful for dust, grass, and asphalt feels noticeably sticky and at low pace, does loads of deep digging. The JConcepts tires embrace mushy, open cell inserts made for carcass flexibility. Look for real JConcepts logos, lettering, packaging, and rubber compounding earlier than any buy. Look for respected sellers and distributors and demand genuine merchandise. The package deal is full and backed with JConcepts buyer assist and racing heritage.
Features:
- Pre-mounted, matches – FCX24 Smasher and different 1/24thvehicles
- Tire measures – 20mm large x 63mm O.D.
- V-style tread with replicated “hand-cutting”
- Single contour carcass with conventional mounting bead
- Glide 5 and Crusher wheel choices accessible
- Impactful tire lettering with retro JConcepts brand
- Available in “super soft” inexperienced compound
- Includes mushy, open cell inserts
- Mega model and efficiency