Press Release From JConcepts:
www.jconcepts.net
As years go by, sure gadgets and developments are sometimes appeared again on with gratitude. The late 1980’s and early 1990’s was constructed on pin fashion tires, and JConcepts is re-imagining a classic tire line-up from 1991 and adapting them to a 1.9” entrance 2wd wheel. The Step Spike, constructed on a small radius carcass to suit the Hazard #3358 and Mono #3437 entrance wheels are designed for at the moment’s compounds and with optimized pin spacing and placement are constructed to work in soiled and loamy situations.
Step Spikes on the entrance of a 2wd buggy seem very rugged and able to turning inside absolutely anything in moist floor situations. When grime sticks to the tires, these fashion tires dig onerous with their twin and step spike building offering two layers of rubber to bury into deep rooted situations. The sq. and backside block is positioned 90 levels to the floor carcass and is a platform for the cone sort pin which bends and flexes with floor terrain.
The pins terminate very early and close to the sidewall, so drivability is less complicated in 180-degree corners. A really small rib is positioned on the sidewall to assist management flexibility and gives a of completion to the looks of the traditional entrance tire mixture. Re-imagining the RC trade is a brand new section of improvement the place customized creators and designers look again on the golden age and add a contact of modern-day expertise to older ideas. The Step Spike is a kind of gadgets, and wouldn’t it been good to take it again in time with you to 1991?
When it involves embracing the RC group, JConcepts helps a whole lot of occasions per 12 months and locks in on key occasions selling racing, bashing, scale and path actions, and collection occasion participation. It’s this kind of exercise that helps the JConcepts Team try for brand new heights in efficiency whereas interacting with the perfect the interest has to supply. Product designs are filled with over 30 years of RC expertise and backed with JConcepts buyer assist and racing heritage.
Features:
- Classic 1.9” bead mounting diameter
- Step Spike design with sq. base function
- Continuous carcass for facet chunk
- Detailed and retro sidewall lettering
- Available in inexperienced compound
- Includes JConcepts And-1 open cell inserts
As years go by, sure gadgets and developments are sometimes appeared again on with gratitude. The late 1980’s and early 1990’s was constructed on pin fashion tires and JConcepts is re-imagining a classic tire line-up from 1991 and adapting them to a 1.7” rear 2wd wheel. The Taper Spike, constructed on a bubbled carcass to suit the Hazard #3359 and Mono #3437 rear wheels are designed for at the moment’s compounds and with optimized pin spacing and placement constructed to work in soiled and loamy situations.
Taper Spikes on the rear of a 2wd buggy seem very rugged and able to gripping something in moist floor situations. When grime sticks to the tires, these fashion tires dig onerous with their tapered spike building offering a rubber pin to bury into deep rooted situations. The backside of the pin angles extraordinarily aggressively, a tough taper into the cone sort pin which is able to naturally bend and flex with floor terrain. The Taper Spike within the Green compound feels very pliable to the contact, adjusts to variation and with inexperienced compound presents itself to surfaces in a singular approach.
The pins terminate very near the tip of the sidewall and barely overhang so drivability is less complicated in 180-degree corners. A really small rib is positioned on the sidewall to assist management flexibility and gives a of completion to the looks of the traditional entrance tire mixture. Re-imagining the RC trade is a brand new section of improvement the place customized creators and designers look again on the golden age and add a contact of modern-day expertise to older ideas. The Taper Spike is a kind of gadgets, and wouldn’t it been good to take it again in time with you to 1991?
When it involves embracing the RC group, JConcepts helps a whole lot of occasions per 12 months and locks in on key occasions selling racing, bashing, scale and path actions, and collection occasion participation. It’s this kind of exercise that helps the JConcepts Team try for brand new heights in efficiency whereas interacting with the perfect the interest has to supply. Product designs are filled with over 30 years of RC expertise and backed with JConcepts buyer assist and racing heritage.
Features:
- Classic 1.7” bead mounting diameter
- Taper Spike design, taper to cone function
- Continuous “bubble” carcass for facet chunk
- Detailed and retro sidewall lettering
- Available in inexperienced compound
- Includes JConcepts And-1 open cell inserts