Press Release From JConcepts:
www.jconcepts.net
Strength, efficiency, and luster runs deep with the titanium stand-offs from JConcepts. The Fin Titanium gadgets change the usual components and have a lightweight design and with built-in pivot, accepts the inventory mounting {hardware}. The 7mm hex based mostly design permits set up with the most well-liked wrench within the RC arsenal but in addition tapers right down to small diameters and the shock pivot space.
The stand-offs are precision machined to put in neatly and permit the shocks floating freedom and simply the correct quantity of fore and aft motion. The within the merchandise is massively undercut to scale back much more weight however nonetheless maintain agency and clamp nicely towards the shock tower. The gadgets can be found in burnt blue and stealth black shade choices and have a 2nd operation machining method to supply a sliver or uncooked titanium luster to the match and end.
The Fin stand-offs are light-weight, and the unique design brings out the glamour and high quality that makes titanium one of the vital sought-after unique supplies on the earth. The set contains two stand-offs and could be secured with the inventory {hardware} or accessible individually, #5142 JConcepts Top Hat titanium screws. The commonplace 3mm locknut is used to finalize the meeting and safe the shock into place.
The 8mm stand-off is a direct bolt-on half to the Team Associated RC10B7 | RC10B7D autos and must be used on the entrance shock tower.
Features:
- Direct match for the entrance tower on the RC10B7 | RC10B7D
- Original JConcepts design and “Fin” styling
- High-grade, machined titanium materials
- Available in burnt blue and stealth black
- 2nd operation machining for silver highlights
- 7mm Hex base materials for ease of set up
- Aesthetic jewellery
Strength, efficiency, and luster runs deep with the titanium stand-offs from JConcepts. The Fin Titanium gadgets change the usual components and have a lightweight design and with built-in pivot, accepts the inventory mounting {hardware}. The 7mm hex based mostly design permits set up with the most well-liked wrench within the RC arsenal but in addition tapers right down to small diameters and the shock pivot space.
The stand-offs are precision machined to put in neatly and permit the shocks floating freedom and simply the correct quantity of fore and aft motion. The within the merchandise is massively undercut to scale back much more weight however nonetheless maintain agency and clamp nicely towards the shock tower. The gadgets can be found in burnt blue and stealth black shade choices and have a 2nd operation machining method to supply a sliver or uncooked titanium luster to the match and end.
The Fin stand-offs are light-weight, and the unique design brings out the glamour and high quality that makes titanium one of the vital sought-after unique supplies on the earth. The set contains two stand-offs and could be secured with the inventory {hardware} or accessible individually, #5143 JConcepts Top Hat titanium screws. The commonplace 3mm locknut is used to finalize the meeting and safe the shock into place.
The 10mm stand-off is a direct bolt-on half to the Team Associated RC10B7 | RC10B7D autos and must be used on the rear shock tower.
Features:
- Direct match for the rear tower on the RC10B7 | RC10B7D
- Original JConcepts design and “Fin” styling
- High-grade, machined titanium materials
- Available in burnt blue and stealth black
- 2nd operation machining for silver highlights
- 7mm Hex base materials for ease of set up
- Aesthetic jewellery