Press Release From Custom Works:
www.customworksrc.com
This equipment is designed to be used within the rising 1/10 midget class of dust oval racing. It is effectively fitted to unfastened dust type tracks and excessive chew surfaces that sometimes use 2.2 buggy styled rubber tire.
With it’s heritage based mostly off of the profitable Custom Works Outlaw Sprint automotive this new Beast Midget equipment comes with a number of completely different components and options to make it completely fitted to the rising 1/10 Midget Spec Class of racing.
- Offset Carbon Chassis Plate~
- 3MM Offset Carbon rear tower~
- CW MDX Big Bore shocks on all 4 corners
- Rigid Rear camber hyperlink mount
- Long Rear Arms for elevated rear traction
- 3MM Rear Arm mounts with adjustgable 3 and 5 levels of toe
- 30 Degree entrance suspension mounts with 3MM screws*
- One piece shock mounts
- Includes all cage and physique components and panels
- Full Ball Bearings
- CW 2.6 Ball Differential
- Dual Bellcrank Steering setup
- Titanium Turnbuckles all through
- Adjustable peak motor mount
While lots of the above components are utilized to fulfill the spec class necessities there are a number of different non-obligatory components that can be utilized outdoors of the spec class guidelines for faster and simpler changes.
- Optional Custom Works patented adjustable rear arms
- Optional Gear Differential out there
*Note: Not all {hardware} is metric but however lots of the key parts are actually which embody the entrance and rear suspension mounts. With this variation the 3mm screws will use a bigger 2mm or 5/64″ hex wrench which can make set up and removing of the screws a lot simpler then with the 1/16″ wrench prior to now.