From Locked Up RC:
Our 1.9″ TrailReady HD sequence wheels are the very best trying scale reproduction wheel you will discover available on the market at this time.
This wheel is designed to work with the Vanquish Products SLW 6 lug hub fashion and any of our 1.9″ Easy Mount rings (offered individually).
This wheel makes use of 1 exterior and 1 inside ring and WILL work on vans just like the Axial Capra & SCX10-III.
These inside bead locks are additionally extremely light-weight in comparison with our customary choices.
What’s included:
- 1x 1.9″ TrailReady HD SLW Positive Offset Bright Finish
- 1x Internal lock ring
Dimensions (with plain rings & {hardware}):
Bead Diameter: 1.9″
Width: 26mm
Backspacing:18.75mm
Weight: 1.9oz
**Please be aware that these wheels are Positive Offset and can sit 5mm inboard in comparison with our customary wheels.
These are supposed for use with portal axles and will intrude with customary axle knuckle setups.
If you need to house them out to be close to customary/inventory monitor, use a 350 or 415 SLW wheels hub.
350 can be barely narrower than inventory, 415 barely wider.
This wheel requires any of our 1.9″ Easy Mount rings which aren’t included.
This wheel requires M2x7 {hardware} for the outer beadlock ring which isn’t included.
This wheel is designed to work with Vanquish Products SLW fashion 6 lug hubs which aren’t included.
This wheel requires 4-40 {hardware} to connect to an SLW hub which isn’t included.
#100siB-PO – $19.50
Visit LockedUpRC.com
See more posts about Locked Up RC
