From Locked Up RC:
Our 1.9″ 5 Cog Ring Inserts are a good way so as to add a little bit of coloration to your Locked Up RC wheel set.
Like our well-liked “Backlight Glow Rings”, these inserts are sandwiched between your present bead lock ring and wheel.
These Ring Inserts protrude from behind your ring to supply a numerous quantity of coloration relying on setup.
The 5 cogs go nice with our 5 spoke wheel kinds such because the Recluse and Adversary.
These inserts can be utilized with ANY of our 1.9″ bead lock rings however we really feel they give the impression of being finest with our extra open designs just like the Agile, Demon & Sever.
What is included:
- 1x 1.9″ 5 Cog Bubble Gum Ring Insert
Specs:
- FDM printed with PLA
- Matte Finish
- ~41mm outer diameter
Printed components could require you to do some remaining deburring. Just like plastic components from a components tree.
So, BEFORE set up, please examine the piece for any burrs that have to be eliminated.
To set up:
1. Remove your outer bead lock ring and lay your wheel face up.
2. Place the Insert Ring into the wheel in order that the aspect with the “flange” is on the high.
3. Reattach the bead lock ring and tighten to softly push insert into place.
4. Verify that the bead lock ring is flush towards the wheel (examine from the edges).
(If the ring isn’t sitting flush, examine for alignment and burrs.)
#2104-BubbleGum – $3.00
Visit LockedUpRC.com
See more posts about Locked Up RC
