From HPI Racing:
HPI SD-25MGWP SERVO (WATER-PROOF/6.0V/22KG/METAL GEARED)
This water-proof steel gear servo is good for bashers and racers searching for a tricky and sturdy servo that can be utilized in moist situations (e.g. rain, snow, puddles).
Features:
- Operating Voltage: 6.0-7.4V
- 6V: Speed: 0.13 sec/60 levels, Torque: 22kg-cm
- 7.4V: Speed: 0.11 sec/60 levels, Torque: 25kg-cm
- Servo Spline: 25T
Dimensions:
Main case: 40x40x20.0mm (excluding mounting tabs, servo spline, & cable outlet)
Mounting tab gap centres: 49x10mm
Weight: 74g (excluding servo horn)
NOTE: Before driving in moist situations, guarantee that all electronics fitted to the car are secure to make use of (marked as water resistant or waterproof), or that they’re totally enclosed and protected against water and moisture (corresponding to in a sealed receiver/battery case). Fans mounted on pace controllers are usually not waterproof – we advocate to disconnect the fan from the ESC earlier than driving in moist situations and permit it to dry totally earlier than reconnecting the fan energy. Lubricate uncovered steel drivetrain components corresponding to bearings, outdrives and diff shafts earlier than driving in moist situations. Motors are usually not meant for submerged use and could also be broken if used when below water. After driving in moist situations, be sure to rinse off dust and any corrosive liquids like saltwater with plain water and re-lubricate steel drivetrain components.
#160546
HPI SD-16MGWP SERVO (WATER-PROOF/6.0V/16KG/METAL GEARED)
This water-proof steel gear servo is good for bashers and racers searching for a tricky and sturdy servo that can be utilized in moist situations (e.g. rain, snow, puddles).
Features:
- Operating Voltage: 6.0-7.4V
- 6V: Speed: 0.13 sec/60 levels, Torque: 16kg-cm
- 7.4V: Speed: 0.11 sec/60 levels, Torque: 20kg-cm
- Servo Spline: 25T
Dimensions:
Main case: 40x40x20.0mm (excluding mounting tabs, servo spline, & cable outlet)
Mounting tab gap centres: 49x10mm
Weight: 60g (excluding servo horn)
NOTE: Before driving in moist situations, guarantee that all electronics fitted to the car are secure to make use of (marked as water resistant or waterproof), or that they’re totally enclosed and protected against water and moisture (corresponding to in a sealed receiver/battery case). Fans mounted on pace controllers are usually not waterproof – we advocate to disconnect the fan from the ESC earlier than driving in moist situations and permit it to dry totally earlier than reconnecting the fan energy. Lubricate uncovered steel drivetrain components corresponding to bearings, outdrives and diff shafts earlier than driving in moist situations. Motors are usually not meant for submerged use and could also be broken if used when below water. After driving in moist situations, be sure to rinse off dust and any corrosive liquids like saltwater with plain water and re-lubricate steel drivetrain components.