From HOBBYWING:
QuicRun 10BL120 Sensored G2
Best worth for cash, Easy to make use of
The new 10BL120 G2, takes the excellent high quality and sturdiness of confirmed HOBBYWING platforms and makes it even simpler to make use of and setup. The excellent alternative for tenth scale setups.
BEC improve, stronger driver
The BEC’s steady output present has been upgraded from 3A to 4A. The most present is at 7A, and the output voltage is now 6V/7.4V adjustable. Hobbyist will be capable of use high-voltage and highly effective servos accessible in the marketplace with higher management.
Boost/Turbo timing expertise
The 10BL120 G2 options adjustable digital timing. Turbo and Boost can be utilized to effective tune energy supply and get essentially the most out of your setup. Up to 32 levels of digital timing is out there.
Note: Boost and Turbo timing can’t be used with a 3S battery to forestall harm.
Combining software program and {hardware} to offer complete safety
The ESC is constructed utilizing high of the road {hardware}, and confirmed software program to offer a sturdy and dependable platform.
This permits for multi degree safety that provides to the general efficiency and sturdiness.
Abundance programming strategies
Multiple programming/tuning strategies are supported. Works with the Multifunction LCD programming Box Pro. The Multifunction LCD Programming Box (Non professional). The LED Programming Box, and has on board button/led tuning.
Supports Motor Rotation
The motor rotation is adjustable CW (clockwise) and CCW (counterclockwise), adapting to completely different chassis.
Specs:
Scale: 1/tenth
Brushed/Brushless: BL
Sensored/Sensorless: SD
Waterproof: No
Cont./Peak Current: 120A/760A
Input Voltage: 2-3S Lipo
BEC Output: Switch Mode 6V/7.4V @4A
Input Wires: Black-12AWG-200MMmm*1 / Red–12AWG-200MMmm*1
Output Connectors: Blue-12AWG-200mm*1 Yellow-12AWG-200mm*1 Orange-12AWG-200mm*1
Input Connectors: No
Output Connecotors: No
SET Button on ESC: Supported
LED Program Box: Supported
LCD Pro Program Box: Supported
OTA Programmer: Not Supported
Program Port: Separate Program Port
Fan Size: 25x25x10mm
Output Wires: 5-8.4V
Input Connectors: Powered by BEC
Firmware Upgrade: Not Supported
Size: 43*36.8*32.3mm
Weight: 101.5g (Included wires&connectors)
Motors: Sensorless / Sensored Brushless Motor
Vehicles: 1/tenth Touring Cars/Buggies/Drift Cars
KV Rating/T Count: 2SLipo ≥ 4.5T 3SLipo ≥ 10.5T 3650 Size Motor
#30125002
Visit HOBBYWINGDirect.com
See more posts about HOBBYWING
