From HoBao USA:
Radio: 3-channel 2.4GHz FHSS with twin price steering and throttle, cost jack on transmitter for non-compulsory NiCd batteries
Servo: High output ball bearing, steel gear, digital, 18kg-cm torque
Motor: 3900Kv brushless, 4 pole, Outer Diameter Ø36mm, Shaft Ø3mm
ESC: HobbyWing 60A waterproof ESC 2~3S with single Deans plug battery connectors, cooling fan, program card
Features:
All Metal Parts CNC Machined.
Chassis: Lightweight, Hard anodized CNC aluminum, 3mm thick.
Center Top Brace
Wire move by means of.
Drive:
Central: Single Ø4mm Hardened metal heart driveshaft.
Optional Alum driveshaft #OP1-0072.
Front: CVA axles, Ø3.2mm Hardened metal.
Rear: Dogbone axles, Ø3.2mm Hardened metal
Differentials:
Center diff is instantly related to rear diff.
Front, Rear and Center Differential, Metal Bevel gear, Anti-leakage Differential housing
Pinion Gear: 10T (MOD 1)/ Ring Gear: 39T (MOD 1)
Center Spur Gear: 40T (MOD 1)
Front differential crammed with #5K silicone oil.
Center differential crammed with #5K silicone oil.
Rear differential crammed with #3K silicone oil.
Shocks:
Filled with #600 silicone oil.
Alum 12mm Big Body, 3.5mm Shaft, Alum Adjustable Ring, Shock Cap Protector.
Spring:
Front: 0.86kg/cm, L=50mm, Blue
Rear: 064kg/cm, L=65mm, Blue
Optional Front Spring #OP1-0073: 1kg/cm, L=50mm, Grey
Optional Rear Spring #OP1-0074: 0.73kg/cm, L=65mm, Grey
Shock Tower: 3mm CNC alum
Optional carbon fiber shock tower, Front tower #OP1-0070 & Rear tower #OP1-0071
Suspension:
Front PBS
Optional alum steering block set #OP1-0077; Alum rear hub #OP1-0079.
New strengthened composite higher arms and decrease arms.( Also Fitting for older variations of the TT10). Optional carbon fiber arm insert #OP1-0068 and #OP1-0069.
Front & rear anti-roll bars.
Front and rear CNC alum arm holder with capsule inserts #11367, adjustable toe angles and anti-squat angles .
Steering:
New Steering Crank set with CNC alum rack and exhausting spring. Ball bearing outfitted with servo saver.
Battery tray:
Motor Gear: 13T (MOD 1)
Spur Gear: 40T (MOD 1)
Motor Mount:
CNC alum laydown motor mount
Fitting for motors with dimension under 38mm
Spur gear cowl
Tires:
Pin-spoke tires
Wheel Hex Hub:
Front 12mm wheel hex hubs , Plastic
Rear 12mm wheel hex hubs, +1mm , Plastic
Optional Front wheel hex hubs #OP1-0075; Rear wheel hex hubs #OP1-0076
Wheels:
5-Spoke wheels, white, 12mm Hex
Optional yellow wheels #11106Y/ Pre-Mounted Tires on yellow Wheels #11105Y
Ball Bearings: Full set included
Body: Blue Paint or Sliver Paint
Caster: Adjustable.
Camber: Adjustable.
Requirements (RTR):
- LiPo batteries with single Deans Connector.
- Battery Charger
- AA Batteries for Transmitter (4)
Requirements (ARR):
- Radio 2 channel
- ESC & Motor
- High-torque steering servo
- Glue for tire
- Paint for physique
- LiPo batteries with single Dean plug connector
- Battery Charger
- AA Batteries for Transmitter (4)
#HB-TT2E-C60BU – 1/10 HYPER TT2.0 PRO ELECTRIC TRUCK RTR- BLUE BODY – $399.00
#HB-TT2E-C60SV – 1/10 HYPER TT2.0 PRO ELECTRIC TRUCK RTR- SILVER BODY – $399.00
#HB-TT2E – 1/10 HYPER TT2.0 PRO ELECTRIC TRUCK ARR – $276.00
Visit HoBao-USA.com
See more posts about HoBao USA
