From Hitec:
RDX2 1000 AC/DC Dual Port Charger / Discharger / Power Supply
With a glossy trendy design and easy-to-transport deal with, the RDX2 1000 is the AC/DC powerhouse it’s essential cost your high-capacity battery packs at fast charges. The twin output ports every provide 20 amps of energy to concurrently cost two batteries of any chemistry; or, you’ll be able to pair the outputs to cost at charges as much as 35 amps.
The RDX2 1000 options an easy-to-use LCD interface show and helpful push button controls, whereas the front-panel XT60 connectors and XH steadiness ports assist maintain wiring uncluttered. Its excessive cost and discharge charges for decreasing resistance and bettering energy make it good for Stock Class racers. Accepting each 12V DC, and 100 – 240 volts AC, the RDX2 1000 is good for charging at residence or within the area, and ideal for all hobbyists needing ultra-fast charging of their bigger battery packs. Internal circuitry permits discharge charges as much as 2 amps, and 40 amps when paired with the companion AD350 discharge module (offered individually).
Features:
- User-Friendly Interface
- Balance, Standard, Storage and Cycle Modes for All Lithium Battery Chemistries
- Battery Meter
- Internal Resistance
- Terminal Voltage Control
- Re-Peak Charge Mode and Delta-Peak Sensitivity for NiMH/NiCd Batteries
- Capacity Cut-Off Limit
- Smart Ventilation Fan
- Intelligent Power Distribution Between Ports
- USB-C Socket for PC Interface and Firmware Upgrades
- Programmable Power Supply Function 5-27V / 1-15A
- Tire Warmer Power Supply Output (16V/8A
Technical Specifications:
100V – 240V AC Operating Voltage Range
LiPo, LiFe & LiIon Cell Count: 1-6 Cells
NiCd/NiMH Cell Count: 1-15 Cells
Pb Lead-Acid Based Cell Count: 2-20 Volts
Charge Circuit Power: 450W AC / 1000W DC
Discharge Circuit Power: 10W (350W w/ AD350 Discharge Module)
Charger Current Range: 0.1A – 20A x 2 / 0.1A – 35A Parallel
PC Interface with Downloadable Software
12V Power Supply Mode Runs different Devices
Dimensions: 7.5 x 6.0 x 3.9 in. / 190 x 152 x 99mm
Weight: 3.0 lbs. / 1.36kg
#44401
AD350 Analyzer & Discharger
The high-power AD350 is good for discharging and analyzing each Nickel and LiPo batteries. Its PC interface and better capability provide prolonged functionality and comfort that will help you keep final battery efficiency.
Paired with the companion RDX2 1000 Charger discharge module (offered individually).
Features:
- High-Power Analyzer Discharger for Cycling NiCd/NiMH & LiPo Batteries
- PC Interface with Downloadable Analyzing Software
- All Aluminum Case with Built-in Fan
Technical Specifications:
Discharge Power: 350W
Discharge Current: 0.1-40.0A
Over Temp. Protection: > 203ºF
Working Temp.: 32º ~ 104ºF
Dimensions: 6.2 x 4.1 x 3.7 in. / 158 x 104 x 94mm
Weight: 2.7 lbs. / 1.22kg
#44405
Visit HitecRCD.com
See more posts about Hitec
