Fantom 2S Dual Balance Charge Leads

2S (2-Cell), DUAL BALANCE Charge Lead – 4mm Bullet (charger) to 5mm Bullet x 2 (battery)

Our NEW 2S DUAL BALANCE CHARGE LEAD means that you can steadiness cost 2 x 2S batteries, on the similar time, off of 1 channel of your charger.

More Power to the People…

FEATURES:

NEW and IMPROVED in all areas, making these probably the most skilled grade cost leads in the marketplace!
Hand-Built within the USA! (with elements sourced from the U.S. and China)
NEW and IMPROVED 4mm bullet connectors on the charger finish, for improved longevity and present circulation!
NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress factors!
NEW PRO SERIES printed shrink tubing!
Inline connectors on battery finish, for simpler elimination from the battery!
BUILT TO LAST with the very best high quality supplies and craftsmanship all through!
All of our cost leads include a feminine JST XH steadiness faucet plug on the charger finish and both a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery finish.
JST XH steadiness ports are discovered on practically all fashionable chargers.
This cost lead works with any model 2S (2-Cell) LiPo/LiHV battery pack and charger combo utilizing 4mm Bullet and JST XH steadiness faucet (charger finish) + 5mm Bullet and 2mm steadiness faucet (battery finish).
Built with high-amp 12awg, 1200 strand wire.
24 inches (61 cm) lengthy.

HOW TO USE:

Plug 4mm Bullet connector (charger finish of the harness) into the 4mm Bullet output plug of the charger.
Plug feminine JST XH steadiness connector (charger finish of the harness) into steadiness port of charger (see your charger guide for particulars).
BATTERY 1 – Plug your 5mm Bullet connectors (each with white inside shrink tube), of your cost lead, into the 5mm Bullet connector plugs of your battery (purple constructive / black unfavourable).
BATTERY 1 – Plug your 2mm Bullet steadiness connector (with white shrink tube), of your cost lead, into the 2mm Bullet steadiness connector plug of your battery.
BATTERY 2 – Plug your 5mm Bullet connectors (each with black inside shrink tube), of your cost lead, into the 5mm Bullet connector plugs of your battery (purple constructive / black unfavourable).
BATTERY 2 – Plug your 2mm Bullet steadiness connector (with black shrink tube), of your cost lead, into the 2mm Bullet steadiness connector plug of your battery.
Charge batteries as you usually do.

#FAN26148 – $55.99

2S (2-Cell), DUAL BALANCE Charge Lead – XT90 (charger) to 5mm Bullet x 2 (battery)

Our NEW 2S DUAL BALANCE CHARGE LEAD means that you can steadiness cost 2 x 2S batteries, on the similar time, off of 1 channel of your charger.

More Power to the People…

FEATURES:

NEW and IMPROVED in all areas, making these probably the most skilled grade cost leads in the marketplace!
Hand-Built within the USA! (with elements sourced from the U.S. and China)
NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress factors!
NEW PRO SERIES printed shrink tubing!
Inline connectors on battery finish, for simpler elimination from the battery!
BUILT TO LAST with the very best high quality supplies and craftsmanship all through!
All of our cost leads include a feminine JST XH steadiness faucet plug on the charger finish and both a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery finish.
JST XH steadiness ports are discovered on practically all fashionable chargers.
This cost lead works with any model 2S (2-Cell) LiPo/LiHV battery pack and charger combo utilizing an XT90 connector and JST XH steadiness faucet (charger finish) + 5mm Bullet and 2mm steadiness faucet (battery finish).
Built with high-amp 12awg, 1200 strand wire.
24 inches (61 cm) lengthy.

HOW TO USE:

Plug XT90 connector (charger finish of the harness) into the XT90 output plug of the charger.
Plug feminine JST XH steadiness connector (charger finish of the harness) into steadiness port of charger (see your charger guide for particulars).
BATTERY 1 – Plug your 5mm Bullet connectors (each with white inside shrink tube), of your cost lead, into the 5mm Bullet connector plugs of your battery (purple constructive / black unfavourable).
BATTERY 1 – Plug your 2mm Bullet steadiness connector (with white shrink tube), of your cost lead, into the 2mm Bullet steadiness connector plug of your battery.
BATTERY 2 – Plug your 5mm Bullet connectors (each with black inside shrink tube), of your cost lead, into the 5mm Bullet connector plugs of your battery (purple constructive / black unfavourable).
BATTERY 2 – Plug your 2mm Bullet steadiness connector (with black shrink tube), of your cost lead, into the 2mm Bullet steadiness connector plug of your battery.
Charge batteries as you usually do.

#FAN26150 – $55.99

2S (2-Cell), DUAL BALANCE Charge Lead – XT60 (charger) to 5mm Bullet x 2 (battery)

Our NEW 2S DUAL BALANCE CHARGE LEAD means that you can steadiness cost 2 x 2S batteries, on the similar time, off of 1 channel of your charger.

More Power to the People…

FEATURES:

NEW and IMPROVED in all areas, making these probably the most skilled grade cost leads in the marketplace!
Hand-Built within the USA! (with elements sourced from the U.S. and China)
NEW and IMPROVED Thick-Wall Adhesive-Backed Shrink Tubing added to all stress factors!
NEW PRO SERIES printed shrink tubing!
Inline connectors on battery finish, for simpler elimination from the battery!
BUILT TO LAST with the very best high quality supplies and craftsmanship all through!
All of our cost leads include a feminine JST XH steadiness faucet plug on the charger finish and both a male JST XH, JST XH 2S-6S multi-tap board, or 2mm bullet plug on the battery finish.
JST XH steadiness ports are discovered on practically all fashionable chargers.
This cost lead works with any model 2S (2-Cell) LiPo/LiHV battery pack and charger combo utilizing an XT90 connector and JST XH steadiness faucet (charger finish) + 5mm Bullet and 2mm steadiness faucet (battery finish).
Built with high-amp 12awg, 1200 strand wire.
24 inches (61 cm) lengthy.

HOW TO USE:

Plug XT90 connector (charger finish of the harness) into the XT90 output plug of the charger.
Plug feminine JST XH steadiness connector (charger finish of the harness) into steadiness port of charger (see your charger guide for particulars).
BATTERY 1 – Plug your 5mm Bullet connectors (each with white inside shrink tube), of your cost lead, into the 5mm Bullet connector plugs of your battery (purple constructive / black unfavourable).
BATTERY 1 – Plug your 2mm Bullet steadiness connector (with white shrink tube), of your cost lead, into the 2mm Bullet steadiness connector plug of your battery.
BATTERY 2 – Plug your 5mm Bullet connectors (each with black inside shrink tube), of your cost lead, into the 5mm Bullet connector plugs of your battery (purple constructive / black unfavourable).
BATTERY 2 – Plug your 2mm Bullet steadiness connector (with black shrink tube), of your cost lead, into the 2mm Bullet steadiness connector plug of your battery.
Charge batteries as you usually do.

JConcepts JCI Tucked 1979 Ford F-150 Clear Body « Big Squid RC – RC Car and Truck News, Reviews,