From Custom Works RC:
This package is designed to be used within the rising 1/10 midget class of dust oval racing. It is nicely fitted to free dust model tracks and excessive chew surfaces that sometimes use 2.2 buggy styled rubber tire.
With it’s heritage primarily based off of the profitable Outlaw Sprint automotive this new Beast Midget package comes with a number of completely different components and options to make it completely fitted to the rising 1/10 Midget Spec Class of racing.
- Offset Carbon Chassis Plate~
- 3MM Offset Carbon rear tower~
- CW MDX Big Bore shocks on all 4 corners
- Rigid Rear camber hyperlink mount
- Long Rear Arms for elevated rear traction
- 3MM Rear Arm mounts with adjustgable 3 and 5 levels of toe
- 30 Degree entrance suspension mounts with 3MM screws*
- One piece shock mounts
- Includes all cage and physique components and panels
- Full Ball Bearings
- CW 2.6 Ball Differential
- Dual Bellcrank Steering setup
- Titanium Turnbuckles all through
- Adjustable top motor mount
While most of the above components are utilized to fulfill the spec class necessities there are a number of different non-compulsory components that can be utilized outdoors of the spec class guidelines for faster and simpler changes.
- Optional Custom Works patented adjustable rear arms
- Optional Gear Differential accessible
*Note: Not all {hardware} is metric but however most of the key elements are actually which embrace the entrance and rear suspension mounts. With this alteration the 3mm screws will use a bigger 2mm or 5/64″ hex wrench which is able to make set up and removing of the screws a lot simpler then with the 1/16″ wrench prior to now.
#0650 – $499.00
Visit CustomWorksRC.com
See more posts about Custom Works RC
