Editor’s word: Previously Avid launched HD C & D Arm Mounts + 0° & =/-2.5° Aluminum Bulkheads For The B7 too.
From Avid:
The subsequent spherical of Avid Parts for the AE B7 are right here! We have a bunch extra in improvement, and sure EVERY BLUE PART shall be obtainable in Avid’s signature black and silver fashion! This batch of components not solely provides fashion to your B7, however a lot wanted energy, from 7075 entrance bulkheads, hardened hinge pins, and HD Arm Mounts will assist hold your automobile constant tumble after tumble and win after win!
B7 Rear Ball Stud Mount | +2mm
The Avid AE B7 Rear Ball Stud Mount raises the ball stud +2mm so that you don’t must run as many ball stud washers, preserving your ball stud bent free. It is black anodized with a silver spotlight and laser etched with our brand.
Features:
- +2mm to cut back the ball studs wanted, preserving your ball stud bent free.
- Maintains package geometry.
- Made with 7075-T6 and anodized black with silver chamfer highlights.
- Laser-etched Avid brand.
- Replaces AS92440.
#AV10144-2 – $15.00
B7 Servo Mount | One-Piece
The Avid AE B7 One-Piece Servo Mount is black anodized with a silver spotlight and laser etched with our brand.
Features:
- One-Piece servo mount.
- Made with 7075-T6 and anodized black with silver chamfer highlights.
- Laser-etched Avid brand.
#AV10142 – $24.00
B7 Motor Mount | Aluminum
The Avid B7 Motor Mount is constructed from 7075-T6, black anodized, silver chamfer, and laser-etched brand.
Features:
- Made with 7075-T6 and anodized black with silver chamfer highlights.
- Laser-etched Avid brand.
- Direct substitute for ASC92439.
#AV10141-AL – $20.00
B7 Anti-Roll Bar Hardware Set
NOTICE: You will want two units of those if you’re working sway bars on each ends. Sort of apparent however form of not, seeing the 8 components makes you suppose it’s for the entire automobile!
The Avid B7 Anti-Roll Bar Hardware Set is constructed from 7075-T6, anodized black, silver highlights, and contains (4) set screws.
Tips
You will want two units of those if you’re working sway bars on each ends. Sort of apparent however form of not!
Features:
- Made with 7075-T6 and anodized black with silver chamfer highlights.
- Includes (2) pivots, (2) collars, and (4) set screws.
- Replaces ASC92457
#AV10137 – $10.00
B7 Hardened Hinge Pin | Set
The Avid B7 Hardened Hinge Pin set replaces all of the hinge pins in your B7 aside from the rear outdoors hinge pin screw. The rear interior hinge pin is lengthed to 50mm as an alternative of package the 49.5mm to offer extra help from pulling out of your inventory C arm mount.
Features:
- Hardened metal hinge pins, full substitute set.
- The rear interior hinge pin is lengthed to 50mm as an alternative of the package 49.5mm to offer extra help from pulling out of your inventory C arm mount.
- Includes: (2) 3×26, (2) 3×34, and (2) 3.5×50 Hardened Hinge Pins.
- Replaces ASC92496.
#AV10143-SET – $11.00
B7 Hardened Hinge Pins | Front Outer | 3x26mm
The Avid B7 3×26 Front Outer Hardened Hinge Pins are constructed from, you guessed it, hardened metal.
Features:
- Hardened 3×26 metal hinge pin used on the entrance outdoors of the B7.
- Includes: (2) 3×26 Hardened Hinge Pins.
- Individual replacements of ASC92496 as an alternative of shopping for the entire set.
#AV10143-26 – $3.50
B7 Hardened Hinge Pins | Front Inner | 3x34mm
The Avid B7 3×34 Front Inner Hardened Hinge Pins are constructed from, you guessed it, hardened metal.
Features:
- Hardened 3×34 metal hinge pin used on the entrance within the B7.
- Includes: (2) 3×34 Hardened Hinge Pins.
- Individual replacements of ASC92496 as an alternative of shopping for the entire set.
#AV10143-34 – $4.00
B7 Hardened Hinge Pins | Rear Inner | 3.5x50mm
The Avid B7 3.5×50 Rear Inner Hardened Hinge Pins are constructed from, you guessed it, hardened metal. Kit hinge pins are 49.5 and are only a tad quick which aids in them ripping out the aspect of your package C arm mount. The added size will assist stop this from occurring.
Credits
Darren, our UK distributor (Xfactory), introduced this product thought to our consideration when the B7 got here out. He additionally mentioned for the unique C arm mounts with the capsule cutout, that you may flip them and take away a 1mm shim out of your arm spacing so there was extra materials to maintain the hinge pin from pulling out. Great data over there within the UK!
Features:
- Hardened 3.5×50 metal hinge pin used on the rear within the B7.
- Kit is 49.5mm lengthy and these are lengthened to offer extra help from pulling out of your inventory C arm mount.
- Includes: (2) 3.5×50 Hardened Hinge Pins.
- Individual replacements of ASC92496 as an alternative of shopping for the entire set.
#AV10143-50 – $5.00
Visit AvidRC.com
See more posts about Avid
