Author: RCN Editor

Press Release From Element RC:www.associatedelectrics.com/element/The StealthR XF transmission symbolizes the continued development of the Element RC model. We took lots of the notes and design options we realized from the Stealth X and refined them right into a forward-motor setup.The new design strikes the motor ahead to assist maintain the burden over the entrance wheels whereas sustaining a decrease middle of gravity. This upgraded pre-assembled transmission comes outfitted with new 18% overdrive gears, Factory Team Slipper lockout, and ball bearings for ultra-smooth operation.The Stealth XF Transmission Set comes pre-assembled and greased from the manufacturing unit and contains:#42333 Enduro SE FT…

Team Associated 1/14 Reflex 14MT RTR Monster TruckNew over at Team Associated is the 1/14th scaled Reflex 14MT RTR Monster Truck. The new 14MT comes with large Reedy brushless energy and a heavy obligation chassis for severe bashing. Here are the highlights-* Reedy Power brushless pace management and 4,500kV motor* High-torque digital steering servo and a couple of.4GHz radio system* All-terrain tires* Adjustable wheelie bar* Durable, impact-absorbing entrance bumper with LEDs* New blue and inexperienced monster truck physique* New full steel diff ring and pinion gears* Three sealed differentials* Threaded coil-over shock absorbers* Adjustable turnbuckles* 12mm drive hexesThe Team Associated…

Injora 1.0″ 39g Black Brass Beadlock Wheels with -2.65mm OffsetNew from Injora is another set of wheels for 1/24 and 1/18-scale crawlers. Their 1.0″ 39g Black Brass Beadlock Wheels with -2.65mm Offset (#W1008) provide up a trendy manner so as to add contemporary type and solid-planted efficiency to your small-scale path rig.These wheels are made out of machined brass and have a flat black end with uncovered brass accents. Each wheel weighs 39g, giving your path truck over 150g of low, rolling weight.Injora 1.0″ 39g Black Brass Beadlock Wheel Specs: Outer Diameter: 27.5mm (1.08in) Width: 15.3mm (0.60in) Wheel Hub: 7mm…

From Team Yokomo:Based on the most recent racing buggy, the low-priced RO1.0 is now accessible as a ready-to-run mannequin! While sustaining the favored driving efficiency, the chassis is pre-assembled, and the most recent 2.4GHz transmission/reception system, brushless motor, and lithium polymer battery are put in upfront. Of course, all the things is pre-adjusted, so it’s an RTR mannequin that may be pushed instantly by merely charging the driving battery with the included charger after opening the bundle. The operability is sufficient to impress even professional drivers, and the specs are glorious sufficient to compete in races. Optional components for RO1.0/SO1.0,…

From Team Associated:Team Associated’s 1:14 scale Reflex 14MT 4WD electrical monster truck comes out of the field assembled and ready-to-run! It includes a Reedy Power brushless velocity management and motor, high-torque digital steering servo, and a pair of.4GHz radio system. With all that energy obtainable at your disposal, you recognize this monster truck was designed with efficiency in thoughts. The versatility provided by the all-terrain tires, adjustable wheelie bar, turnbuckles, caster blocks and rear hubs make the Reflex 14MT prepared for any terrain you’ll be able to throw at it. Additional options…

From Element RC:The Stealth XF symbolizes the continued development of the Element RC model. We took most of the notes and design options we discovered from the Stealth X and refined them right into a forward-motor setup. The new design strikes the motor ahead to assist preserve the burden over the entrance wheels whereas sustaining a decrease heart of gravity. This upgraded pre-assembled transmission comes outfitted with new 18% overdrive gears, Factory Team Slipper lockout, and ball bearings for ultra-smooth operation. The Stealth XF Transmission Set comes pre-assembled and greased from the…

Xpress 1/10 Arrow AM1 4WD M-Chassis KitNew from Xpress is the 1/tenth scaled Arrow AM1 4WD M-Chassis Kit. Designed for competitors, the brand new Arrow AM1 is loaded with high-end supplies to present you a top quality race machine. Here are the highlights-* Internal Gear Ratio – 2.353* Shaft pushed four wheel drive with floating gearbox system* Sealed gearbox* Front spool with gear differential within the rear* Aluminum entrance and rear driveshafts* Low profile aluminum shocks* Front spring metal double joint common shafts* 2.25mm graphite predominant chassis* Full bearing set* Adjustable battery place* Wheelbase – 225mm* Width – 160mmThe Xpress…

Serpent 1/10 Spyder SRX2 Gen3 2WD Team Buggy KitJust introduced by Serpent is the 1/10 Spyder SRX2 Gen3 2WD Team Buggy Kit. The new Gen3 SRX2 has been up to date for improved flex traits, in addition to extra velocity. Here are the highlights-* Carbon battery holders and straps* Updated facet pods with separated bulkhead helps* Carbon fiber chassis stiffeners with multi-flex adjustment* Updated steering rack arms and new Ackermann arms* New straight entrance a-arms* All new caster and steering-blocks* Increased house for electronics and battery* Completely re-imagined 3-gear lay-down transmission* New rear suspension geometry* New aerodynamic physiqueThe Serpent Spyder…

Remote ID/Registration Update Andrew Griffith Featured News Comments If you’ve gotten the e-mail that its time to resume your FAA leisure registration, and also you’re getting the immediate to enter your fashions give this video from our good friend Tim McKay explaining the newest a couple of minutes of your time. Despite the FAA and others use of the generic phrase “drone” this is applicable to all SUAS (Small Unmanned Aerial Systems) together with mannequin plane. There’s additionally an AMA weblog put up from the Government Affairs workforce coping with the identical topic that may be discovered right here:…

SWORKz 1/10 S14-4D “Dirt” 4WD PRO Buggy KitNew from SWORKz is the 1/tenth scaled S14-4D “Dirt” 4WD PRO Buggy Kit. The new S14-4D was designed to be used on filth tracks and comes with a brand new 7075 aluminum chassis. Here are extra highlights-* New gearbox design* Adjustable differential system* Lightened, laborious anodized 7075 aluminum chassis* Adjustable chassis flex* 4 completely different battery positions* 4mm carbon fiber shock towers* New sway bars* Aluminum entrance toe plate* Lower shock positioning* New Synthesis rear hub systemThe SWORKz S14-4D “Dirt” 4WD PRO Buggy Kit is priced at €499 (round $545) and has a…