Team Associated RC10T6.4 Team Kit

From Team Associated:
Champions By Design

The RC10T6.4 shares key parts with the RC10B6.4, RC10B6.4D, and RC10B74.2 Team Kits, making it simpler than ever to run a number of courses on the similar time. Suspension and leaping goes by way of the large-volume 13mm large bore shocks with new truck springs. The new chassis design is a truck model of the RC10B6.4 buggy design and will get a brand new ballstud mount and prime plate system with an angled steering for improved consistency. On prime of that, racers can tune the steering top, axle path, and caster inserts for tuning the entrance finish really feel. The rear finish grip is improved with the non-obligatory C and D mounts and 93.5mm CVA bones included within the package. Suspension linkage rides on the brand new 3.5mm diameter rod ends and turnbuckles.

The RC10T6.4 is up to date to the most recent racing specs to provide racers an edge over the competitors.

New Features of RC10T6.4:

New 13mm large bore threaded aluminum shocks and is derived with machined shock pistons for improved bump and bounce dealing with
13mm machined shock pistons, 2×1.6mm entrance and a pair of×1.8mm rear
New entrance ballstud mount and prime plate with angled steering system for improved steering consistency
New 3.5mm heavy-duty ball cups and turnbuckles for max sturdiness
Updated rear suspension with wider C and D mounts from the RC10B6.4 sequence
New longer 92.5mm CVA driveshafts for extra rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
New chassis facet rails with the RC10B6.4 fan mount system
New truck size aluminum chassis with 22.5Â° kick-up to enhance up to date front-end geometry and with new form to scale back chassis scrub with the monitor floor
20 deg., 22.5 deg., and 25 deg. molded bulkheads included for an entire vary of caster and kickup choices
B6.4 adjustable top steering bellcrank and rack system for optimized bumpsteer in any respect experience heights and caster angles
B6.4 -1mm kingpin offset steering and caster block set for smoother and extra predictable steering by way of all the wheel throw
Aluminum RC10B6.4 ESC mounting tray shifted ahead within the chassis and with a wider footprint to suit electronics, leading to a weight bias positioned additional ahead
Factory Team RC10B6.4 11g aluminum ESC tray

Legacy Features from RC10T6.2:

Gull wing entrance and rear arms and shock towers for improved high-traction dealing with
B74.1 two-piece rear hubs with aluminum higher caps for high quality geometry changes
1.3mm entrance anti-roll bar and {hardware} included for added high-speed stability
Laydown Stealth transmission included
+1 carbon fiber steering block arms
Updated entrance physique mount is extra inflexible to guard physique from cracking
Lightweight, hard-anodized aluminum chassis with centralized mass and three mid-motor positions for improved dealing with on all monitor sorts
Differential top adjustment with included 0, 1, 2, and 3mm inserts
Easy entry to differential
Split slipper meeting for higher weight steadiness and shock clearance
Heavy-duty routed 4.0mm carbon fiber shock towers
Aluminum shocks with 3mm shafts and X-rings for improved smoothness
Machined pistons included for higher match and smoother operation
Reverse bellcrank steering permits extra room for mounting electronics
Bolt-on steering block arms for simple Ackermann changes
Aluminum rear ballstud mount for added power
One-piece shock bushings to make meeting simpler
Lightweight aluminum prime shaft
Aluminum C and D arm mounts included for big vary of anti-squat and toe changes
Factory Team upgraded ball bearing package included

Specifications:

Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 368mm (14.49in)
Width: varies
Wheelbase: 288mm (11.34in)
Internal Gear Ratio: 2.6:1
Drive: 2WD

* This car comes as a package and should be absolutely assembled by the consumer. Electronics and/or an engine/motor could also be required.

Required to Complete:

1:10 scale 540-size electrical motor (Reedy Sonic line advisable)
1:10 scale digital pace management (Reedy Blackbox #27002, 27003, 27004, 27005)
2-cell LiPo battery pack (Reedy #27322, 27323, 27818, 27324)
Battery charger (#27203)
2-channel floor transmitter, and its batteries
2-channel receiver
Steering servo (Reedy servo line #27106, 27107)
Pinion gear (48 pitch)
Polycarbonate RC Truck physique (#71126)
Spray paint for polycarbonate physique
1:10 scale 12mm hex truck wheels (#7852, 7853)
1:10 scale truck tires and foam inserts
Cyanoacrylate (CA) glue for tires and wheels (#1597)
Thread locking compound (#1596)
Other useful objects: Silicone Shock Fluid, Body Scissors (Factory Team #1737), Reamer / Hole Punch (Factory Team #1499), Shock Pliers (Factory Team #1675), Hex Wrenches (Factory Team #1518), Nut Drivers (Factory Team #1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Calipers or a Precision Ruler