From Team Associated:
Champions By Design
The RC10SC6.4 shares key parts with the RC10T6.4, RC10B6.4, and RC10B74.2 Team Kits, making it simpler than ever to run a number of courses on the identical time. Suspension and leaping goes by means of the large-volume 13mm massive bore shocks with new truck springs. The new chassis design is a brief course truck model of the RC10B6.4 buggy design and will get a brand new ballstud mount and prime plate system with an angled steering for improved consistency. On prime of that, racers can tune the steering top, axle path, and caster inserts for tuning the entrance finish really feel. The rear finish grip is improved with the elective C and D mounts and 93.5mm CVA bones included within the equipment. Suspension linkage rides on the brand new 3.5mm diameter rod ends and turnbuckles.
The RC10T6.4 is up to date to the newest racing specs to present racers an edge over the competitors. The RC10SC6.4 is up to date to the newest racing specs to present racers an edge over the competitors.
New Features of RC10SC6.4:
- New 13mm massive bore threaded aluminum shocks and is derived with machined shock pistons for improved bump and bounce dealing with
- 13mm machined shock pistons, 2×1.6mm entrance and a pair of×1.8mm rear
- New entrance ballstud mount and prime plate with angled steering system for improved steering consistency
- New 3.5mm heavy-duty ball cups and turnbuckles for optimum sturdiness
- Updated rear suspension with wider C and D mounts from the RC10B6.4 collection
- New longer 92.5mm CVA driveshafts for extra rear grip
- 7.0mm blue aluminum rear clamping hexes with laser etching
- New chassis facet rails with the RC10B6.4 fan mount system
- New truck size aluminum chassis with 22.5° kick-up to enhance up to date front-end geometry and with new form to cut back chassis scrub with the monitor floor
- 20 deg., 22.5 deg., and 25 deg. molded bulkheads included for a whole vary of caster and kickup choices
- B6.4 adjustable top steering bellcrank and rack system for optimized bumpsteer in any respect journey heights and caster angles
- B6.4 -1mm kingpin offset steering and caster block set for smoother and extra predictable steering by means of your complete wheel throw
- Aluminum RC10B6.4 ESC mounting tray shifted ahead within the chassis and with a wider footprint to suit electronics, leading to a weight bias positioned additional ahead
- Factory Team RC10B6.4 11g aluminum ESC tray
Legacy Features from RC10SC6.2:
- Flat entrance and rear arms and shock towers for improved excessive traction dealing with
- B74.1 two-piece rear hubs with aluminum higher caps for wonderful geometry changes
- 1.3mm entrance anti-roll bar and {hardware} included for added high-speed stability
- Laydown Stealth transmission included
- +1 carbon fiber steering block arms
- Updated entrance physique mount is extra inflexible to guard physique from cracking
- Lightweight, hard-anodized aluminum chassis with centralized mass and three mid-motor positions for improved dealing with on all monitor varieties
- Differential top adjustment with included 0, 1, 2, and 3mm inserts
- Easy entry to differential
- Split slipper meeting for higher weight steadiness and shock clearance
- Heavy-duty routed 4.0mm carbon fiber shock towers
- Aluminum shocks with 3mm shafts and X-rings for improved smoothness
- Machined pistons included for higher match and smoother operation
- Reverse bellcrank steering permits extra room for mounting electronics
- Bolt-on steering block arms for simple Ackermann changes
- Aluminum rear ballstud mount for added energy
- One-piece shock bushings to make meeting simpler
- Lightweight aluminum prime shaft
- Aluminum C and D arm mounts included for big vary of anti-squat and toe changes
- Factory Team upgraded ball bearing equipment included
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Truck
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: varies
Width: varies
Wheelbase: 325mm (12.8in)
Weight: varies
Drive: 2WD
* This automobile comes as a equipment and should be totally assembled by the consumer. Electronics and/or an engine/motor could also be required.
Required to Complete:
- 1:10 scale 540-size electrical motor (Reedy Sonic line really useful)
- 1:10 scale digital velocity management (Reedy Blackbox #27002, 27003, 27004, 27005)
- 2-cell LiPo battery pack (Reedy #27322, 27323, 27818, 27324)
- Battery charger (#27203)
- 2-channel floor transmitter, and its batteries
- 2-channel receiver
- Steering servo (Reedy servo line #27106, 27107)
- Pinion gear (48 pitch)
- Polycarbonate RC Truck physique (#71126)
- Spray paint for polycarbonate physique
- 1:10 scale 12mm hex truck wheels (#7852, 7853)
- 1:10 scale truck tires and foam inserts
- Cyanoacrylate (CA) glue for tires and wheels (#1597)
- Thread locking compound (#1596)
- Other useful gadgets: Silicone Shock Fluid, Body Scissors (Factory Team #1737), Reamer / Hole Punch (Factory Team #1499), Shock Pliers (Factory Team #1675), Hex Wrenches (Factory Team #1518), Nut Drivers (Factory Team #1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Calipers or a Precision Ruler
#70009 – 399.99
Visit AssociatedElectrics.com/TeamAssociated
See more posts about Team Associated
