We have the most effective readers round! You guys are at all times developing with intelligent methods to make constructing and flying simpler, and we love if you share your suggestions with us at MAN@airage.com. Here are just a few of our favorites.
A SHARP IDEA
Most mannequin airplanes use dowels to safe the forefront of the wing to the fuselage, and for straightforward set up, the nostril of the dowel ought to be barely tapered. Many modelers use sandpaper and a sanding block to make the taper. Next time, take the dowel and insert it into an electrical or mechanical pencil sharpener. After just a few seconds within the sharpener, the dowel could have a crisp, clear, even taper. A bit of sanding will create a easy end.
IN TOO DEEP
If you chop hinge slots utilizing a interest knife, you understand that making slots of the right depth is a hit-or-miss operation. Here’s an answer: Using a straightedge or a tape measure, lay the knife-blade level to the depth required (the blade should be parallel with the straightedge), and use a permanent-ink marker or some tape to create a line straight throughout the blade the place it enters the wooden. The line on the blade signifies when it’s on the right depth.
NOW YOU SEE IT; NOW YOU DON’T
Most cowls require cutouts for the air vents and motor and speed-control entry. To make the cutouts precisely, you have to measure and mark them correctly. Ballpoint pens and pencils don’t write properly on easy, painted surfaces, and features made by common markers are troublesome, if not unattainable, to erase. An answer is to make use of dry-erase markers—those utilized in boardrooms throughout the nation. Dry-erase markers, like common markers, will depart a line on easy surfaces, however if you’ve completed making the cutouts, you may merely use a rag to wipe off any remaining ink.
HANGING AROUND
We all know the sort of tangled mess that wall chargers can turn out to be in the event that they aren’t saved orderly. Go to your native home-improvement retailer, and purchase just a few of the inserts that go into duplex outlet bins. Attach them to a cupboard door or different out-of-the-way place, and voila!—you’ve bought a straightforward, tangle-free solution to dangle your chargers for storage.