Press Release From Hitec:
www.hitecrcd.com
With a glossy trendy design and easy-to-transport deal with, the RDX2 1000 is the AC/DC powerhouse that you must cost your high-capacity battery packs at speedy charges. The twin output ports every provide 20 amps of energy to concurrently cost two batteries of any chemistry; or, you possibly can pair the outputs to cost at charges as much as 35 amps.
The RDX2 1000 options an easy-to-use LCD interface show and helpful push button controls, whereas the front-panel XT60 connectors and XH steadiness ports assist hold wiring uncluttered. Its excessive cost and discharge charges for reducing resistance and enhancing energy make it good for Stock Class racers. Accepting each 12V DC, and 100 – 240 volts AC, the RDX2 1000 is good for charging at dwelling or within the area, and good for all hobbyists needing ultra-fast charging of their bigger battery packs. Internal circuitry permits discharge charges as much as 2 amps, and 40 amps when paired with the companion AD350 discharge module (offered individually).
The high-power AD350 is good for discharging and analyzing each Nickel and LiPo batteries. Its PC interface and increased capability provide prolonged functionality and comfort that can assist you keep final battery efficiency.
RDX2 1000 KEY FEATURES
- User-Friendly Interface
- Balance, Standard, Storage and Cycle Modes for
All Lithium Battery Chemistries - Battery Meter
- Internal Resistance
- Terminal Voltage Control
- Re-Peak Charge Mode and Delta-Peak Sensitivity
for NiMH/NiCd Batteries - Capacity Cut-Off Limit
- Smart Ventilation Fan
- Intelligent Power Distribution Between Ports
- USB-C Socket for PC Interface and Firmware
Upgrades - Programmable Power Supply Function
5-27V / 1-15A - Tire Warmer Power Supply Output (16V/8A)
AD350 KEY FEATURES - High-Power Analyzer Discharger for Cycling NiCd/
NiMH & LiPo Batteries - PC Interface with Downloadable Analyzing
Software - All Aluminum Case with Built-in Fan
RDX2 1000 TECHNICAL SPECIFICATIONS • 100V – 240V AC Operating Voltage Range
- LiPo, LiFe & LiIon Cell Count: 1-6 Cells
- NiCd/NiMH Cell Count: 1-15 Cells
- Pb Lead-Acid Based Cell Count: 2-20 Volts
- Charge Circuit Power: 450W AC / 1000W DC • Discharge Circuit Power: 10W
(350W w/ AD350 Discharge Module) • Charger Current Range:
- 0.1A – 20A x 2 / 0.1A – 35A Parallel
- PC Interface with Downloadable Software
- 12V Power Supply Mode Runs different Devices
- Dimensions: 7.5 x 6.0 x 3.9 in. / 190 x 152 x 99mm • Weight: 3.0 lbs. / 1.36kg
AD350 TECHNICAL SPECIFICATIONS • Discharge Power: 350W
- Discharge Current: 0.1-40.0A
- Over Temp. Protection: > 203oF
- Working Temp.: 32o ~ 104oF
- Dimensions: 6.2 x 4.1 x 3.7 in. / 158 x 104 x 94mm • Weight: 2.7 lbs. / 1.22kg