TT02’s are the ultimate spec class race car. That is why many racers have one of these little Tamiya’s as a second car. With that in mind, when it comes to playing with the gearing many will not have the suitable range of 0.6 mod pinions unless they are a Tamiya enthusiast.
Well, now you won’t have to worry about that. As here is a chart that will allow you to run the industry standard 64 and 48dp spurs and pinions with the standard Tamiya motor mount.
You will need to however have the Tamiya 54500 High speed gear set to provide you with the ability to fit the correct spur gears.
.jpg)
A few things that have informed these charts. The spur gears and pinions on these charts will fit under the original gear cover. If you file the inside, cut it open etc then you can go bigger with the pinion and smaller with the spur for even lower FDR’s
.jpg)
So if you want to play with your gearing, or maybe have a stealth TT02 to surprise your friends… take a look at the charts below.
There are a few disclaimers.. I have tried several of these combinations, but not all of them.. if you find good alternatives then please let me know.
Have fun, and please don’t cheat if you are doing a spec class.
