From Locked Up RC:
Our 1.9″ Stator bead lock rings have a novel stepped cog design.
This look is a primary for us and may operate as aspect biters in tight conditions.
Made of top of the range aluminum this ring is drilled to match the Axial 1.9″ bead lock ring mounting sample.
This model will get a Hand Finish then is anodized Fossil Gray by Bateman’s Custom Coatings.
Because these could be a restricted version resulting from Batemans closing… get them whilst you can!
What’s included:
- 1x 1.9″ Stator bead lock ring with Fossil Gray Anodized end
Dimensions:
Bead Diameter – 1.9″
Width – 3mm”
Weight – .25oz
Our Easy Mount® wheel system solely makes use of 6 screws to carry the ring to the wheel, making your life a lot simpler when working with foams and weights. An extra 18 screws thread into the ring and slide into bigger holes in our Easy Mount® wheels. We recommend M2x7 (or M2x8) screws to carry the ring on. The remaining 18 screws may be M2x8 or shorter.
If you do not need our Easy Mount® wheels you possibly can nonetheless use our Easy Mount® rings through the use of 18 of our M2x1 screws to string into the ring.
If you have already got your personal M2 {hardware} of your selection, you possibly can lower it flush with the again of the ring like we used to do for all our installations.
No {hardware} is included
#169fossilgrayH – $8.00
Visit LockedUpRC.com
See more posts about Locked Up RC