From RPM:
ESC Cage for the Castle Cobra 8 ESC & Traxxas Vehicles
Our ESC Cage for the Castle Cobra 8 ESC for Traxxas autos supplies a strong, optimistic mount. A locked in mount retains your new and worthwhile ESC in place even below essentially the most excessive circumstances. The ESC will be run with or with out a fan too. Our cage encases the ESC physique solely, leaving all the ESC fan free to do its job.
The RPM ESC Cage for the Castle Cobra 8 ESC works with the Traxxas Sledge, Revo 2.0 and the Unlimited Desert Racer. Our ESC Cage suits within the inventory location as nicely.
Each ESC Cage is designed to simplify ESC set up and maintenance of the automobile. No extra combating gooey double-sided tape to take away your aftermarket ESC throughout upkeep both. Transferring the electronics to a different automobile additionally turns into a breeze.
Additionally, we embrace two separate On/Off change mounts for extra versatility in positioning the On/Off change to your liking. The Base Plate additionally has two On/Off change mounting places, growing its versatility even additional.
Each RPM ESC Cage is manufactured from our ridiculously powerful mix of engineering grade nylons and backed by our restricted lifetime guarantee towards breakage. Don’t belief your funding to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a reputation you’ve recognized for many years for bulletproof safety – RPM!
Tech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to slot in place of inventory Traxxas VXL6S ESC’s #3485 and #3485T. Our ESC Cage works with the next Castle half numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While our ESC Cage will match quite a lot of functions, they’ve been examined and assured to suit the next Traxxas autos in inventory kind solely – Sledge, Revo 2.0 and the Unlimited Desert Racer.
#70282 – $13.95
ESC Cage for the Castle Cobra 8 ESC & ARRMA 6S Vehicles
Our ESC Cage for the Castle Cobra 8 ESC supplies a strong, optimistic mount to maintain your new and worthwhile ESC in place even below essentially the most excessive circumstances. Check out this checklist of options constructed into every RPM ESC Cage:
- Solid mount with out utilizing adhesives or zip-ties.
- The ESC will be run with or with out a fan.
- Air channels alongside the perimeters enable air motion for higher cooling.
- Installation and upkeep simplification.
- Easy swaps of the ESC between autos.
- Integrated On / Off change mount.
- Rolled cage edge so no sharp edges come into contact along with your motor wires.
- Integrated inventory Cable-Tidy Clip mount.
- Manufactured from our ridiculously powerful mix of engineering grade nylons.
- Backed by our restricted lifetime guarantee towards breakage.
Don’t belief your funding to double-sided tape or zip ties. One fail and your ESC will eject like a bullet from a gun! Trust a reputation you’ve recognized for many years for bulletproof safety – RPM!
Tech Notes: The RPM ESC Cage for the Cobra 8 ESC is designed to switch the inventory ESC Mounting Plate ARRMA #AR320430. Our ESC Cage works with the next Castle half numbers: 010-0172-00, 010-0172-01, 010-0172-02, 010-0172-03 and 010-0172-04. While our ESC Cage will match quite a lot of functions, they’ve been examined on the next ARRMA 6S autos in inventory kind solely – Kraton, Mojave, Notorious, Talion, and Typhon that use the #AR320430 inventory mounting plate. While the Fireteam makes use of the identical inventory mounting plate, house restrictions might forestall our ESC Cage from bolting to the chassis correctly.
#70712 – $13.95