From JConcepts:
JConcepts jumped out with a brand new aggressive tread sample for the 1.0” crawling and monster fanatic. The Hold was designed from the ground-up as a carved and chiseled design to deal with a wide range of scale off-road terrain and dirt bogging motion. The massive horizontal traction bars put a “Hold” on options starting from grime, asphalt, grass, mud, rock, and clay. At the tip of the tread, the downward development begins and divulges one other flat bar of gripping sample to supply offset traction controlling attributes. During the bar transitions, an angular phase stabilizes and offers edginess to terrain at one other route to assist the carry and reduce via much more environments.
The 63mm exterior diameter measurement gives further measurement in a profitable fleet of tires which have measurement, element, and nonetheless look girth applicable for 1/twenty fourth scale off-road crawling and monster machines. The Hold is offered pre-mounted to suit the FCX24 Smasher and an array of 1/twenty fourth automobiles in the marketplace. The sidewall lugging on The Hold is a factor of magnificence beginning with peaks set on the outer most constraints of the design. An alternating sample of finely detailed tread steps out and in permitting a mess of edging to face out from the design. Inscribed drops of options are positioned in an array sample to advertise extra flexibility in areas of want.
Perhaps the best element of all, the mimicked hand chopping particulars fully cowl The Hold. The horizontal traction bars are again reduce and step right down to the carcass and wrap across the sidewall in a ahead progressing sample. On prime of the carcass itself, extra floor elimination is proven to deliver out depth. Beautiful lettering is bossed alongside the bead space putting title, sizing, and genuine logos in plain view however rested beneath the closely modified tread.
The Hold comes commonplace within the grippy inexperienced compound and contains comfortable open cell inserts for loads of flexibility. New offset and particular clearance wheels are used on the pre-mounts that includes the Glide 5 JConcepts design, or the all-new Crusher wheel. Look for real JConcepts logos, lettering, packaging, and rubber compounding earlier than any buy. Look for respected sellers and distributors and demand genuine merchandise. The product is at all times backed by JConcepts customer support, supported, and developed by professionals with type and authenticity. JConcepts is, World Proven Innovation and Design – since 2003.
Features:
- Pre-mounted, suits – FCX24 Smasher and different 1/twenty fourth automobiles
- Robust carcass, horizonal bar based mostly, 1:1 impressed
- 63mm total measurement with out inserts
- Cut and sliced lugs, stepping and recessed lugs for contortion management
- Super Soft, Green compound
- Glide 5 and Crusher wheel choices out there
- Staggered, drop development middle design for further edges
- Sidewall lugs to peak width, alternating standout edging
- Forward progressing mock reduce sidewall lugging
- Bossed lettering, tucked away under closely modified tread
- Includes comfortable, open cell insert
The Hold – inexperienced compound (pre-mounted for FCX24 Smasher w/ Glide 5 wheel)
Part # – 4058-32911
Retail worth – $29.00
Map worth – $21.75
(Pre-mounted for FCX24 Smasher)
The Hold – inexperienced compound (pre-mounted for FCX24 Smasher w/ Crusher wheel)
Part # – 4058-32913
Retail worth – $29.00
Map worth – $21.75
(Pre-mounted for FCX24 Smasher)
Visit JConcepts.net
See more posts about JConcepts
