From Team Associated:
Champions by Design
Team Associated has been at the forefront of 1:10 scale 2WD off street for the final 40 years beginning with the unique RC10 and are proud to introduce this subsequent era to the world–the RC10B7. 40 years has seen a variety of improvement and adjustments, with every era being a step ahead from the final. The RC10B7 isn’t any exception, boasting new long-arm suspension geometry, weight-centralized electronics structure, KPI adjustable steering blocks, and elevated tunability all through the entire chassis. These improvements have elevated the potential for grip and nook pace, which ends up in sooner lap occasions and an general easier-to-drive really feel than the earlier era.
The RC10B7D is the really helpful beginning equipment for many who plan to race on dust, clay, and a few low-grip AstroTurf tracks. This equipment comes outfitted with a ball differential and an optimized setup which incorporates softer springs and decrease pack pistons. As with earlier generations, the RC10B7D and RC10B7 characteristic totally interchangeable elements between the 2 kits, which permits the consumer to choose and select what configuration they need to use relying on observe situations. Both variations include the identical sturdiness, pace, and lineage of a champion that’s present in any Team Associated race platform.
Features:
- 5-gear laydown transmission with low profile motor mount strikes weight of motor nearer to the middle of the automobile
- Long-arm suspension geometry improves grip and predictability in all situations
- KPI adjustable steering and caster blocks permits for effective tuning steering really feel. Three choices are included within the equipment.
- Vertical entrance outer ballstud permits effective tuning of roll middle, camber acquire, and hyperlink size
- Height adjustable aluminum entrance bulkhead permits for additional tuning of entrance roll middle
- Standard and HRC (High Roll Center) rear hubs included
- Highly adjustable battery holder with thumb tabs permits for straightforward battery removing and effective tuning of weight bias
- 7075-T6 aluminum chassis with elevated departure angle and non-compulsory weight plate pockets
- HD 69mm CVA bones and differential outdrives for improved sturdiness
- Lightweight molded servo mount
- One-piece rear wing mount improves sturdiness
- New 7-inch rear wing and a pair of.5-inch entrance wing
- Low-profile physique included
- Shock tower covers entrance and rear
- 3.5mm turnbuckles and ballcups
Specifications:
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Scale Size: 1:10 Scale
Assembly Level: Kit*
Length: 390mm (15.35in)
Width: varies
Wheelbase: varies
Weight: varies
Internal
Gear Ratio: 2.60:1
Drive: 2WD
* This car comes as a equipment and should be totally assembled by the consumer. Electronics and/or an engine/motor could also be required.
Required to Complete:
- 1:10 scale 540-size electrical RC automobile motor
- 1:10 scale radio management digital pace management
- 7.4V-7.6V 2S LiPo with “shorty” battery dimensions (normal or low-profile peak)
- Battery charger (for chosen battery talked about above)
- Lexan particular spray paint for physique
- 1:10 scale off-road wheels and tires
- 4 AA batteries for radio-controlled automobile radio
- Other useful objects: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors (#1737), Reamer (#1499) or Hole Punch, FT Wrench Set (#1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler.
- 2-channel floor transmitter, 2-channel receiver, and steering servo
#90042 – $389.99
Visit AssociatedElectrics.com/TeamAssociated
See more posts about Team Associated
