Rat Rods, Street Rods and Hot Rods
A tradition of lovers that modify their older coupes’ weight for discount, enhance automobile aerodynamics, and tune their engines to provide extra energy. Becoming widespread after World War II, these heavy, older automobiles underwent drastic surgical procedure to cut their tops, decrease and slope their windshields backward, and compete in pace contests.
The ardour for these rods nonetheless lives at the moment and Team Associated pays tribute to the style with the Pro2 RT10SW rat rod, which relies on the 9-time ROAR Short Course National Championship-winning vehicles, that includes a water resistant high-power Reedy brushless pace management and 3300kV brushless motor, a 2.4GHz 2-channel radio system in addition to our DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to {that a} Reedy metal-gear digital high-torque servo and a water resistant enclosed receiver field–all of this packaged collectively in an impressive factory-finished physique. The RT10SW beast will maintain you cornering with the included high-grip all-terrain tires and light-weight wheels.
Pro2 RT10SW
Team Associated’s Pro2 RT10SW is a extremely detailed and fun-to-drive Ready-to-Run RC Rat Rod. Based on our championship-winning quick course truck, the Pro2 RT10SW options among the newest options in racing. A sturdy, light-weight aluminum prime shaft, rugged metal turnbuckles, and adjustable suspension geometry give the Pro2 RT10SW the last word in dealing with on all terrain!
The #70024C LiPo Combo features a Reedy Compact Balance Charger and Reedy 7.4V 2S LiPo Battery with T-plug.
Features:
- 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
- Durable and light-weight aluminum prime shaft
- Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate each NiMH and 2S or 3S LiPo battery packs
- Impact-absorbing entrance and rear bumpers
- Adjustable physique mounts
- Rear CVA drive shafts for extra reliability
- Aluminum 12mm huge bore coil-over shock absorbers
- Rugged metal turnbuckles for adjustable camber and entrance toe-in
- Adjustable suspension geometry
- Vertical ball ends for roll middle changes, entrance and rear
- Metric {hardware} all through
- 22 precision rubber-sealed ball bearings
Specifications:
Power Source:: Electric
Terrain:: On-Road
Body Style:: Other
Scale Size:: 1:10 Scale
Assembly Level:: Ready-To-Run*
Length:: 492.4mm (19.39in)
Width:: 252mm (9.92in)
Wheelbase:: 277.8mm (10.94in)
Weight:: varies
Internal
Gear Ratio:: 2.6:1
Drive:: 2WD
* This automobile is absolutely assembled and able to run proper out of the field. Some fashions could require a battery and/or charger.
Required to Complete:
#70024, 70024C: Four AA batteries for radio-controlled automobile radio
#70024: Suitable NiMh or 2S or 3S LiPo RC automobile battery
#70024: Radio management battery charger
Other useful objects: Silicone Shock Fluid, Silicone Diff Fluid, Body Scissors (#1737) Reamer / Hole Punch (#1499), FT Wrench Set (#1519), Hobby Knife, Needle Nose Pliers, Wire Cutters, Soldering Iron, Calipers or a Precision Ruler
#70024C – Pro2 RT10SW RTR, black LiPo Combo – $415.99
#70024 – Pro2 RT10SW RTR, black – $349.99
