From Tamiya:
The TA08PRO receives the limited-edition remedy within the type of the TA08R by including a plethora of key Hop-Up Options proper out of the field together with just a few components solely obtainable on this version!
Included Hop-Up Option Parts:
- 51565: TRF419 Gear Differential Unit Aluminum Diff Joint (2pcs.)
- 22004: TA08 Aluminum Servo Mount
- 22005: TA08 Carbon Damper Stays (Front & Rear)
- 22016: TA08 Low Friction King Pin Balls (4pcs.)
- 42319: Lightweight Cross Joints for Double Cardan Joint Shafts (4pcs.)
- 42320: Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.)
- 42346: TRF420 Wheel Axles (2pcs.)
- 42351: TRF420 Center Pulley
- 42357: Cross Joints for Low Friction Assembly Universal Shafts
- 42359: VG O-Rings for Oil Dampers (30°)
- 42361: 43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.)
- 42363: Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.)
- 42374: VG O-Rings for Gear Differentials (40°)
- 53823: Clamp Type Aluminum Wheel Hub (5mm Thick)
- 53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.)
- 53969: 5x8mm Hard Hex Head Ball Head Connector (5pcs.)
- 54121: Aluminum Horn for High Torque Servo Saver
- 54642: 4mm Flange Lock Nut (Black, 8pcs.)
- 51647: TRF420 Aluminum Front Direct Cups (2pcs.)
- 54704: TA07 Aluminum Steering Arm Set
- 54881: Aluminum Adjustable Suspension Mount (A)
- 54883: Aluminum Adjustable Separate Suspension Mounts (XB)
- 54884: Aluminum Adjustable Separate Suspension Mounts (A)
- 54949: TA07 Adjustable Ackerman Set
- 1/10 scale R/C touring automobile chassis package.
- NEW-The 2.0mm carbon fiber higher deck connects entrance and rear bulkheads for pitch rigidity and makes use of a 630-ball bearing on the rear for roll rigidity.
- NEW-Front and rear aluminum higher arm mounts present enhanced rigidity.
- NEW-The aluminum motor mount has two screw-attached, higher deck attachment factors.
- NEW-Rear physique mount makes use of carbon fiber plates and aluminum posts, and limits physique wobble and ensures secure rear traction. Body mount extensions (from Item 54604) enable attachment of our bodies of various heights.
- NEW-Additional ribs on the decrease deck restrict its deformation for superior suspension efficiency and assist restrict harm after sudden crashes.
- Gear items are entrance direct pulley (aluminum direct coupling) and rear gear differential (aluminum differential joint). Item 42351 TRF420 Center Pulley and 71T spur gear are used on the heart for stability even beneath excessive load.
- The drive shafts are double cardan shafts on the entrance and light-weight common shafts on the rear.
- Front aluminum pipes and cross joints are light-weight aluminum.
- NEW-Aluminum wheel hubs restrict wheel deformation and guarantee secure tire grip.
- Comes with 43mm swing shafts, Super Short Big Bore measurement dampers and entrance and rear carbon fiber damper stays, plus adjustable suspension mounts.
- The mannequin is available in a handy carry case.
- Required to finish: 2-channel radio, steering servo, ESC, motor, 7.2-7.4volt battery with appropriate charger, tires, and physique.
#47498
Visit TamiyaUSA.com
See more posts about Tamiya
