Press Release From Tekno RC:
www.teknorc.com
Tekno RC is happy to announce the supply of a number of new elements that may enhance the efficiency of your favourite automobiles! Please see under for extra data on our most up-to-date merchandise.
TKR9416B – Gearbox (-2mm, F/R, EB/NB/ET/NT48 2.x)
This new gearbox lowers the diff peak, which improves bump dealing with and supplies a smoother, extra constant driving expertise, particularly mid-corner. TKR9416B requires the brand new TKR9017B bulkhead cowl.
To keep away from contact with the chassis, Tekno RC NB48 2.X buggies require a light-weight grind (eradicating roughly 0.5mm of fabric) on the chassis under the ring gear. TKR9416B is a direct drop in for the EB/ET/NT48 2.X 1/eighth scale automobiles and no modifications are obligatory.
We suggest using TKR9054B +/-2 rear hubs when utilizing this new gearbox with the NB/EB48 buggies. The mixture of TKR9416B and TKR9054B improves general grip, stability, and predictability within the rear finish.
TKR9141B – Adjustable Ackerman Spindles (-2mm, EB/NB 2.1, requires TKR9057B)
These new spindles will be set to -1mm or -2mm axle peak in comparison with the inventory TKR9141 spindles. The decrease axle peak will increase entrance finish grip, making them supreme for including extra steering. For right bearing clearance whereas utilizing CVs, TKR9057B revised sleeves are required.
TKR9054B – Rear Hubs and Bearing Spacers (+/-2mm, adj roll heart, L/R, EB/NB48 2.1)
Improve the dealing with of your Tekno RC EB/NB48 2.X automobiles with these new +/-2mm rear hubs! Our drivers found that the -2mm place (closest gap to the bearing) elevated rear finish grip, stability, and predictability on all monitor circumstances throughout testing. Although these hubs embody an non-compulsory excessive roll heart setting (hinge pin additional away from the bearing), it was not often used throughout our testing.
TKR9284B – Suspension Arms (revised, rear, EB/NB48 2.1)
These new rear arms have been revised to permit for extra clearance for the -2mm hubs and bulkheads. If you do not wish to purchase new arms, TKR9284 inventory arms will be calmly floor in a pair key areas for fast clearance. These new arms are a direct alternative for TKR9284 and are suitable with the EB/NB 2.X automobiles. There are not any extra elements required.
TKR9017B – Sway Bar and Bulkhead Acc (for -2/-4mm bulkheads)
When putting in the brand new TKR9416B -2mm bulkhead, these new bulkhead covers have to be used to supply extra ring gear clearance in comparison with the inventory TKR9017 covers. These new covers are usually not solely open to the underside, permitting the ring gear clearance, however in addition they seal the bulkhead by extra exactly becoming into the chassis cutout underneath the bulkhead. The sway bar collars are the identical as these included with TKR9017.
TKR9057B – Spindle Pin/Sleeve Set (revised, brief/lengthy, EB/NB48 2.1)
These revised sleeves are required when utilizing the TKR9141B -2mm spindles with CVA’s and have been modified from the inventory TKR9057 sleeves to supply clearance for the 15x21x4mm bearings. However, in case you are working UNI’s, the usual TKR9057 will work simply effective. They are a direct alternative for TKR9057 going ahead and are suitable with TKR9141 customary peak spindles.
Product Links:
TKR9416B – Gearbox (-2mm, F/R, EB/NB/ET/NT48 2.x)
TKR9141B – Adjustable Ackerman Spindles (-2mm, EB/NB 2.1, requires TKR9057B)
TKR9054B – Rear Hubs and Bearing Spacers (+/-2mm, adj roll center,L/R, EB/NB48 2.1)
TKR9284B – Suspension Arms (revised, rear, EB/NB48 2.1)
TKR9017B – Sway Bar and Bulkhead Acc (for -2/-4mm bulkheads)
TKR9057B – Spindle Pin/Sleeve Set (revised, short/long, EB/NB48 2.1)